Mitel 3300 Manuale Utente

Navigare online o scaricare Manuale Utente per no Mitel 3300. Mitel 3300 User's Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 22
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
7/4/2004 Page 1 of 22
Mitel PBX interface with Conferencing Server
Configuration Notes
Note: This document section is maintained by Mitel Networks
When referring to any information in this document please also check the
Additions & Correction section on the last page for updates.
File: Mitel 3300 PBX interface with Conferencing Server V002
Vedere la pagina 0
1 2 3 4 5 6 ... 21 22

Sommario

Pagina 1 - Configuration Notes

7/4/2004 Page 1 of 22 Mitel PBX interface with Conferencing Server Configuration Notes Note: This document section is maintained by Mitel Network

Pagina 2

7/4/2004 Page 10 of 22 2 6102 3 6103 4 6104

Pagina 3 - Introduction

7/4/2004 Page 11 of 22 Create Digit Modification Assignment - in this example, we are using Digit Modification number 4, and there are no digits

Pagina 4 - Digital Link Assignment

7/4/2004 Page 12 of 22 SX200 with ISDN • Attach VCon IGC server to PRI card with straight through cable o Configure hardware for Line Terminati

Pagina 5 - Digital Trunk Assignment

7/4/2004 Page 13 of 22 Example of T1 PRI Programming on SX200 Refer to SX200 EL/ML Technicians Handbook , Programming a PRI, for System Configurat

Pagina 6

7/4/2004 Page 14 of 22

Pagina 7

7/4/2004 Page 15 of 22

Pagina 8

7/4/2004 Page 16 of 22 Define the incoming ISDN trunk as a Dial In trunk in form 15

Pagina 9 - Create Trunk Group

7/4/2004 Page 17 of 22 Assign the ISDN trunks to a trunk group in Form 16

Pagina 10

7/4/2004 Page 18 of 22 Select a T1 Link Descriptor for the ISDN trunks in form 42

Pagina 12 - SX200 with ISDN

7/4/2004 Page 2 of 22 Mitel PBX interface with Conferencing Server Configuration Notes Mitel PBX interface with Conferencing Server Configuration

Pagina 13

7/4/2004 Page 20 of 22 Assign the ISDN link descriptor to slot 6 and/or slot 8 on the PRI card bay, Form 43 Form 44, Network Sync - To be dete

Pagina 14 - 7/4/2004 Page 14 of 22

7/4/2004 Page 21 of 22 T1 Crossover cable wiring Specifications [RJ45 Connector] Supplied with RemoteAbility system. Connector A P

Pagina 15 - 7/4/2004 Page 15 of 22

7/4/2004 Page 22 of 22 Addition & Corrections The change I had to make was with the ANI/DNIS insertion in digit mod with T1/D4 trunks: The do

Pagina 16 - 7/4/2004 Page 16 of 22

7/4/2004 Page 3 of 22 Introduction This document describes the configuration of Mitel Networks PBX’s to correctly interface to the Interactive G

Pagina 17 - 7/4/2004 Page 17 of 22

7/4/2004 Page 4 of 22 ANI/DNIS/ISDN Number Delivery Yes Link Descriptor Assignment Number: 4 Address for Message Control: A BER - Mainte

Pagina 18 - 7/4/2004 Page 18 of 22

7/4/2004 Page 5 of 22 MSDN-DPNSS-DASSII Trunk Circuit Descriptor Number Card Type Dual Seizure Priority Far End Connection

Pagina 19 - 7/4/2004 Page 19 of 22

7/4/2004 Page 6 of 22 • Attach VCon IGC server T1 link to NSU, DSU or Embedded PRI card o Configure hardware for Line Termination through jumpers

Pagina 20 - SX200 with T1/D4

7/4/2004 Page 7 of 22 ANI/DNIS/ISDN Number Delivery Yes Link Descriptor Assignment Number: 4 Address for Message Control: BER - Mainte

Pagina 21

7/4/2004 Page 8 of 22 Digital E and M Trunk Circuit Descriptor Assignment Number: 4 Call Collision Handling: AT&T AT&T C

Pagina 22

7/4/2004 Page 9 of 22 Digital Trunk Assignment Cabinet: 6 Shelf: 1 Slot: 1 Circuit: 1 Card Type: UNIVERSAL T1 Trunk Numbe

Commenti su questo manuale

Nessun commento